PG1X WIKI

My Knowledge Base

User Tools

Site Tools


tech:network:virl:connect-to-physical-network:connect-to-physical-network

This is an old revision of the document!


Cisco VIRL: Communicate with external physical network

  1. Require Your Lab Internet connectivity?
  2. Require Your Lab communicate outside physical switches?

Notice

  1. by default VIRL 1.6 has no physical network connectivity

Prerequisite

  1. 5 interfaces configured.
  2. use Flat interface in this case.
  3. ESXi 6.5

Open UWM, configure following VIRL interface mapping.

You must stop all simulations before this configuration!

tech/network/virl/connect-to-physical-network/connect-to-physical-network.1574064498.txt.gz · Last modified: 2019/11/18 17:08 by wnoguchi