tech:network:ios-select-boot:ios-select-boot
This is an old revision of the document!
起動時に使用する IOS を選択する
R2#sh flash -#- --length-- -----date/time------ path 1 47454756 Sep 29 2015 00:59:58 +00:00 c1841-adventerprisek9-mz.151-4.M10.bin 2 1038 Mar 24 2016 05:45:14 +00:00 home.shtml 3 2746 Mar 24 2016 05:45:28 +00:00 sdmconfig-18xx.cfg 4 1697952 Mar 24 2016 05:45:46 +00:00 securedesktop-ios-3.1.1.45-k9.pkg 5 415956 Mar 24 2016 05:45:58 +00:00 sslclient-win-1.1.4.176.pkg 6 527849 Mar 24 2016 05:46:08 +00:00 128MB.sdf 7 1505280 Mar 24 2016 05:46:30 +00:00 common.tar 8 931840 Mar 24 2016 05:46:40 +00:00 es.tar 9 112640 Mar 24 2016 05:46:48 +00:00 home.tar 10 6389760 Mar 24 2016 05:47:26 +00:00 sdm.tar 5017600 bytes available (59056128 bytes used)
R2>en R2#conf t Enter configuration commands, one per line. End with CNTL/Z. R2(config)#int f0/0 R2(config-if)#ip addr 172.16.128.254 255.255.255.0 R2(config-if)#no shut R2(config-if)# *Jan 28 23:54:36.219: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up *Jan 28 23:54:37.219: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
References
tech/network/ios-select-boot/ios-select-boot.1517183300.txt.gz · Last modified: 2018/01/29 08:48 by wnoguchi
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
