PG1X WIKI

My Knowledge Base

User Tools

Site Tools


tech:network:cisco:ospf:ospf

Table of Contents

OSPF

Blueprint

    • 3.0 Infrastructure
      • 3.2 Layer 3
        • 3.2.a Compare routing concepts of EIGRP and OSPF (advanced distance vector vs. linked state, load balancing, path selection, path operations, metrics)
        • 3.2.b Configure and verify simple OSPF environments, including multiple normal areas, summarization, and filtering (neighbor adjacency, point-to-point and broadcast network types, and passive interface)
      • 1.0 Network Infrastructure
        • 1.4 OSPF (v2 and v3)
          • 1.4.a Adjacencies
          • 1.4.b Network types, area types
          • 1.4.c Path preference
          • 1.4.d Operations
            • 1.4.d i General operations
            • 1.4.d ii Graceful shutdown
            • 1.4.d iii GTSM (Generic TTL Security Mechanism)
          • 1.4.e Optimization, convergence and scalability
            • 1.4.e i Metrics
            • 1.4.e ii LSA throttling, SPF tuning, fast hello
            • 1.4.e iii LSA propagation control (area types)
            • 1.4.e iv Stub router
            • 1.4.e v Loop-free alternate
            • 1.4.e vi Prefix suppression
      • 3.0 Layer 3 Technologies
        • 3.3 Fundamental routing concepts
          • 3.3.n Implement and troubleshoot routing protocol authentication
            • 3.3.n [i] MD5
            • 3.3.n [ii] Key-chain
            • 3.3.n [iv] OSPFv2 SHA1-196bit
            • 3.3.n [v] OSPFv3 IPsec authentication
        • 3.6 OSPF [v2 and v3]
          • 3.6.a Describe packet types
            • 3.6.a [i] LSA yypes [1, 2, 3, 4, 5, 7, 9]
            • 3.6.a [ii] Route types [N1, N2, E1, E2]
          • 3.6.b Implement and troubleshoot neighbor relationship
          • 3.6.c Implement and troubleshoot OSPFv3 address-family support
            • 3.6.c [i] IPv4 address-family
            • 3.6.c [ii] IPv6 address-family
          • 3.6.d Implement and troubleshoot network types, area types and router types
            • 3.6.d [i] Point-to-point, multipoint, broadcast, non-broadcast
            • 3.6.d [ii] LSA types, area type: backbone, normal, transit, stub, NSSA, totally stub
            • 3.6.d [iii] Internal router, ABR, ASBR
            • 3.6.d [iv] Virtual link
          • 3.6.e Implement and troubleshoot path preference
          • 3.6.f Implement and troubleshoot operations
            • 3.6.f [i] General operations
            • 3.6.f [ii] Graceful shutdown
            • 3.6.f [iii] GTSM [Generic TTL Security Mechanism]
          • 3.6.g Implement, troubleshoot and optimize OSPF convergence and scalability
            • 3.6.g [i] Metrics
            • 3.6.g [ii] LSA throttling, SPF tuning, fast hello
            • 3.6.g [iii] LSA propagation control [area types, ISPF]
            • 3.6.g [iv] IP FRR/fast reroute [single hop]
            • 3.6.g [v] LFA/loop-free alternative [multi hop]
            • 3.6.g [vi] OSPFv3 prefix suppression
      • 2.0 Layer 3 Technologies
        • 2.3 Fundamental routing concepts
          • 2.3.n Implement and troubleshoot routing protocol authentication
            • 2.3.n [i] MD5
            • 2.3.n [ii] key-chain
            • 2.3.n [iv] OSPFv2 SHA1-196bit
            • 2.3.n [v] OSPFv3 IPsec authentication
      • 2.6 OSPF [v2 and v3]
        • 2.6.a Describe packet types
          • 2.6.a [i] LSA types [1, 2, 3, 4, 5, 7, 9]
          • 2.6.a [ii] Route types [N1, N2, E1, E2]
        • 2.6.b Implement and troubleshoot neighbor relationship
        • 2.6.c Implement and troubleshoot OSPFv3 address-family support
          • 2.6.c [i] IPv4 address-family
          • 2.6.c [ii] IPv6 address-family
        • 2.6.d Implement and troubleshoot network types, area types and router types
          • 2.6.d [i] Point-to-point, multipoint, broadcast, non-broadcast
          • 2.6.d [ii] LSA types, area type: backbone, normal, transit, stub, NSSA, totally stub
          • 2.6.d [iii] Internal router, ABR, ASBR
          • 2.6.d [iv] Virtual link
        • 2.6.e Implement and troubleshoot path preference
        • 2.6.f Implement and troubleshoot operations
          • 2.6.f [i] General operations
          • 2.6.f [ii] Graceful shutdown
          • 2.6.f [iii] GTSM [generic TTL security mechanism]
        • 2.6.g Implement, troubleshoot and optimize OSPF convergence and scalability
          • 2.6.g [i] Metrics
          • 2.6.g [ii] LSA throttling, SPF tuning, fast hello
          • 2.6.g [iii] LSA propagation control [area types, ISPF]
          • 2.6.g [iv] IP FR/fast reroute [single hop]
          • 2.6.g [v] LFA/loop-free alternative [multi hop]
          • 2.6.g [vi] OSPFv3 prefix suppression

Topics

tech/network/cisco/ospf/ospf.txt · Last modified: 2020/04/17 19:08 by wnoguchi