PG1X WIKI

My Knowledge Base

User Tools

Site Tools


tech:network:cisco:ospf:lsa-control:lsa-control

This is an old revision of the document!


WIP: Cisco: OSPF LSA Control

Common

Tasks

  1. Lab1 Write Base Config: IP config, and Basic Single Area OSPF routing
  2. Lab2 Write Base Config: IP config, and Basic Single Area OSPF routing
  3. Lab3 Write Base Config: IP config, and Basic Single Area OSPF routing
  4. Lab4 Write Base Config: IP config, and Basic Single Area OSPF routing
  5. Lab1 Configure IP and Verify Ping reachability
  6. Lab2 Configure IP and Verify Ping reachability
  7. Lab3 Configure IP and Verify Ping reachability
  8. Lab4 Configure IP and Verify Ping reachability
  9. Lab1 Configure Basic Single Area OSPF, Verify OSPF neighbor, and Ping reachability
  10. Lab2 Configure Basic Single Area OSPF, Verify OSPF neighbor, and Ping reachability
  11. Lab3 Configure Basic Single Area OSPF, Verify OSPF neighbor, and Ping reachability
  12. Lab4 Configure Basic Single Area OSPF, Verify OSPF neighbor, and Ping reachability

Lab 1: 250d43a9-917d-48d3-8794-ca8f5567a6b9 Penta Start Full Mesh Topology

Base Configuration

R1

R2

R3

R4

R5

Lab 2: 1b7dfeae-3fe2-4ae6-91a5-b5e6b92cc669 Square (No Full Mesh) Topology

Base Configuration

R1

R2

R3

R4

Lab 3: 4fba40ec-5b08-4e8d-a535-0961c5a81386 Square (Full Mesh) Topology

Base Configuration

R1

R2

R3

R4

Lab 4: cb9dd9fd-5c75-4c64-8aa4-59f99721647e 6 routers include 2 full meshed square Topology

Base Configuration

R1

R2

R3

R4

R5

R6

Configurations

configure terminal
!
router ospf 1
 neighbor <neigbor-address> database-filter all out
exit
!
end

References

tech/network/cisco/ospf/lsa-control/lsa-control.1583061184.txt.gz · Last modified: 2020/03/01 20:13 by wnoguchi