PG1X

My Knowledge Base

User Tools

Site Tools


tech:network:cisco-virtual-lab-convenient-startup-config:cisco-virtual-lab-convenient-startup-config

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
tech:network:cisco-virtual-lab-convenient-startup-config:cisco-virtual-lab-convenient-startup-config [2019/12/01 09:08]
wnoguchi
tech:network:cisco-virtual-lab-convenient-startup-config:cisco-virtual-lab-convenient-startup-config [2019/12/07 13:20] (current)
wnoguchi
Line 1: Line 1:
-====== Cisco Virtual Lab Convenient startup-config ​======+====== Cisco: EIGRP MD5 Authentication ​======
  
-{{tag>​Cisco ​Router Switch ​Networking ​Swiss-Army-Knife}}+{{tag>EIGRP Authentication ​Cisco Networking}}
  
-Swiss Army Knife.+===== Lab 1 =====
  
-===== Initial Configuration =====+==== Topology ​====
  
-==== VPC ====+{{:​tech:​network:​cisco-virtual-lab-convenient-startup-config:​pasted:​20191207-132016.png}}
  
-<​code>​ +==== Base Configuration ==== 
-ip 192.168.0.101 255.255.255.0 192.168.0.1 + 
-save +++++ Common Configuration Snippet | 
-</​code>​+ 
 +Million common configuration is here.
  
-==== IOSv ====+  - [[tech:​network:​cisco-virtual-lab-convenient-startup-config:​cisco-virtual-lab-convenient-startup-config]]
  
 <​code>​ <​code>​
Line 32: Line 33:
 exit exit
 ! !
-hostname R1+hostname ​
 +</​code>​ 
 + 
 +++++ 
 + 
 +++++ R1 
 + 
 +  * R1 
 + 
 +<​code>​ 
 +configure terminal 
 +
 +interface GigabitEthernet 0/1 
 + ip address 10.1.1.1 255.255.255.0 
 + no shutdown 
 +interface GigabitEthernet 0/2 
 + ip address 10.1.2.1 255.255.255.0 
 + no shutdown 
 +
 +router eigrp 1 
 + ​network 10.1.1.1 0.0.0.0 
 + ​network 10.1.2.1 0.0.0.0 
 +exit
 ! !
 end end
-copy running-config startup-config 
 </​code>​ </​code>​
  
-==== IOSvL2 ====+++++ 
 + 
 +++++ R2 | 
 + 
 +  * R2
  
 <​code>​ <​code>​
-enable 
 configure terminal configure terminal
 ! !
-no service config +interface GigabitEthernet 0/1 
-no ip domain-lookup+ ip address 10.1.2.2 255.255.255.0 
 + ​no ​shutdown 
 +interface GigabitEthernet 0/2 
 + ip address 10.2.3.2 255.255.255.0 
 + no shutdown
 ! !
-line console 0 +router eigrp 1 
- no login + network 10.1.2.2 ​0.0.0.
- ​exec-timeout ​0 0 + network 10.2.3.2 0.0.0.0
- logging synchronous +
- ​privilege level 15+
 exit exit
-line vty 15 +
- ​no ​login +end 
- privilege level 15+</​code>​ 
 + 
 +++++ 
 + 
 +++++ R3 | 
 + 
 +  * R3 
 + 
 +<​code>​ 
 +configure terminal 
 +
 +interface GigabitEthernet 0/1 
 + ip address 10.2.3.3 255.255.255.
 + ​no ​shutdown 
 +interface GigabitEthernet 0/2 
 + ip address 10.3.4.3 255.255.255.0 
 + no shutdown 
 +
 +router eigrp 1 
 + ​network 10.2.3.3 0.0.0.0 
 + ​network 10.3.4.3 0.0.0.0
 exit exit
 ! !
-hostname SW1+end 
 +</​code>​ 
 + 
 +++++ 
 + 
 +++++ R4 | 
 + 
 +  * R4 
 + 
 +<​code>​ 
 +configure terminal 
 +
 +interface GigabitEthernet 0/1 
 + ip address 10.3.4.4 255.255.255.0 
 + no shutdown 
 +interface GigabitEthernet 0/2 
 + ip address 10.4.4.4 255.255.255.0 
 + no shutdown 
 +
 +router eigrp 1 
 + ​network 10.3.4.4 0.0.0.0 
 + ​network 10.4.4.4 0.0.0.0 
 +exit
 ! !
 end end
-copy running-config startup-config 
 </​code>​ </​code>​
 +
 +++++
 +
 +==== Configuration ====
 +
 +=== Lab 1-1 ===
 +
 +  * R2
 +
 +<​code>​
 +configure terminal
 +!
 +router eigrp 1
 + eigrp stub redistributed
 + ! redistribute from ospf to eigrp
 + ​redistribute ospf 1
 + ​default-metric 1000000 1 255 1 1500
 +exit
 +router ospf 1
 + ! redistribute from eigrp to ospf
 + ​redistribute eigrp 1
 +exit
 +!
 +end
 +</​code>​
 +
 +===== References =====
 +
 +  - [[https://​www.infraexpert.com/​study/​eigrpz9.html|EIGRP - ネイバーのMD5認証とは、MD5認証の設定]]
  
tech/network/cisco-virtual-lab-convenient-startup-config/cisco-virtual-lab-convenient-startup-config.1575158918.txt.gz · Last modified: 2019/12/01 09:08 by wnoguchi