PG1X

My Knowledge Base

User Tools

Site Tools


certification:tech:network:cisco:ccie:ccie-rsv5:written:written

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
certification:tech:network:cisco:ccie:ccie-rsv5:written:written [2019/11/09 08:43]
wnoguchi
certification:tech:network:cisco:ccie:ccie-rsv5:written:written [2019/11/09 08:43] (current)
wnoguchi
Line 1: Line 1:
-====== CCIE Routing and Switching v5.1 Written ​Exam ======+====== CCIE Routing and Switching v5.0 Lab Exam ======
  
 ===== Abstract ===== ===== Abstract =====
  
-  * [[https://​learningnetwork.cisco.com/​community/​certifications/​ccie_routing_switching/​written_exam_v5/​exam-topics|CCIE R&S v5.1 Written ​Blueprint]] +  * [[https://​learningnetwork.cisco.com/​community/​certifications/​ccie_routing_switching/​lab_exam_v5/​exam-topics|CCIE R&S v5.0 Lab Blueprint]] 
-  * [[https://​docs.google.com/​spreadsheets/​d/​17vC3hDuv84u0v4b9recBasNDm655KNIX2tZK5PyGGyU/​edit#​gid=716116706|CCIE_R&​S_CertificationPlan - Google Sheets]]+  * [[https://​docs.google.com/​spreadsheets/​d/​17vC3hDuv84u0v4b9recBasNDm655KNIX2tZK5PyGGyU/​edit#​gid=570151342|CCIE_R&​S_CertificationPlan - Google Sheets]]
  
-  * 1.0 Network Principles +  * 1.0 Layer 2 Technologies 
-    * 1.1 Network theory +    * 1.1 LAN switching technologies 
-      * 1.1.a Describe basic software architecture differences between IOS and IOS XE +      * 1.1.a Implement and troubleshoot switch administration 
-        * 1.1.a [i] Control plane and Forwarding plane +        * 1.1.a [i] Managing MAC address table 
-        * 1.1.a [ii] Impact to troubleshooting and performances +        * 1.1.a [ii] errdisable recovery 
-        * 1.1.a [iii] Excluding specific platform'​s architecture +        * 1.1.a [iii] L2 MTU 
-      * 1.1.b Identify Cisco express forwarding concepts +      * 1.1.b Implement and troubleshoot layer 2 protocols 
-        * 1.1.b [i] RIB, FIB, LFIB, Adjacency table +        * 1.1.b [i] CDP, LLDP 
-        * 1.1.b [ii] Load balancing Hash +        * 1.1.b [ii] UDLD 
-        * 1.1.b [iii] Polarization concept and avoidance +      * 1.1.c Implement and troubleshoot VLAN 
-      * 1.1.c Explain general network challenges +        * 1.1.c [i] access ​ports 
-        * 1.1.c [i] Unicast flooding +        * 1.1.c [ii] VLAN database 
-        * 1.1.c [ii] Out of order packets +        * 1.1.c [iii] normal, extended VLAN, voice VLAN 
-        * 1.1.c [iii] Asymmetric routing +      * 1.1.d Implement and troubleshoot trunking 
-        * 1.1.c [iv] Impact of micro burst +        * 1.1.d [i] VTPv1, VTPv2, VTPv3, VTP pruning 
-      * 1.1.d Explain IP operations +        * 1.1.d [ii] dot1Q 
-        * 1.1.d [i] ICMP unreachable,​ redirect +        * 1.1.d [iii] Native VLAN 
-        * 1.1.d [ii] IPv4 options, IPv6 extension headers +        * 1.1.d [iv] Manual pruning 
-        * 1.1.d [iii] IPv4 and IPv6 fragmentation +      * 1.1.e Implement and troubleshoot ​etherchannel 
-        * 1.1.d [iv] TTL +        * 1.1.e [i] LACP, PAgP, manual 
-        * 1.1.d [v] IP MTU +        * 1.1.e [ii] layer 2, layer 3 
-      * 1.1.e Explain TCP operations +        * 1.1.e [iii] load-balancing 
-        * 1.1.e [i] IPv4 and IPv6 PMTU +        * 1.1.e [iv] etherchannel ​misconfiguration guard 
-        * 1.1.e [ii] MSS +      * 1.1.f Implement and troubleshoot spanning-tree 
-        * 1.1.e [iii] Latency +        * 1.1.f [i] PVST+/​RPVST+/​MST 
-        * 1.1.e [iv] Windowing +        * 1.1.f [ii] switch ​priority, port priority, path cost, STP timers 
-        * 1.1.e [v] Bandwidth delay product +        * 1.1.f [iii] port fast, BPDUguard, BPDUfilter 
-        * 1.1.e [vi] Global synchronization +        * 1.1.f [iv] loopguard, rootguard 
-        * 1.1.e [vii] Options +      * 1.1.g Implement and troubleshoot other LAN switching technologies 
-      * 1.1.f Explain UDP operations +        * 1.1.g [i] SPAN, RSPAN, ERSPAN
-        * 1.1.f [i] Starvation +
-        * 1.1.f [ii] Latency +
-        * 1.1.f [iii] RTP/RTCP concepts +
-    * 1.2 Network implementation and operation +
-      * 1.2.a Evaluate proposed changes to a network +
-        * 1.2.a [i] Changes to routing protocol parameters +
-        * 1.2.a [ii] Migrate parts of a network to IPv6 +
-        * 1.2.a [iii] Routing protocol migration +
-        * 1.2.a [iv] Adding multicast support +
-        * 1.2.a [v] Migrate spanning tree protocol +
-        * 1.2.a [vi] Evaluate impact of new traffic on existing QoS design +
-    * 1.3 Network troubleshooting +
-      * 1.3.a Use IOS troubleshooting tools +
-        * 1.3.a [i] debug, conditional debug +
-        * 1.3.a [ii] ping, traceroute with extended options +
-        * 1.3.a [iii] Embedded packet capture +
-        * 1.3.a [iv] Performance monitor +
-      * 1.3.b Apply troubleshooting methodologies +
-        * 1.3.b [i] Diagnose the root cause of networking issue [analyze symptoms, identify and describe root cause] +
-        * 1.3.b [ii] Design and implement valid solutions according to constraints +
-        * 1.3.b [iii] Verify and monitor resolution +
-      * 1.3.c Interpret packet capture +
-        * 1.3.c [i] Using Wireshark trace analyzer +
-        * 1.3.c [ii] Using IOS embedded packet capture +
-  * 2.0 Layer 2 Technologies +
-    * 2.1 LAN switching technologies +
-      * [[tech:​network:​cisco:​udld:​udld]] +
-      * [[tech:​network:​cisco:​stp:​bpduguard:​bpduguard]] +
-      * [[tech:​network:​cisco:​stp:​bpdufilter:​bpdufilter]] +
-      * [[tech:​network:​cisco:​stp:​rootguard:​rootguard]] +
-      * [[tech:​network:​cisco:​stp:​loopguard:​loopguard]] +
-      * [[tech:​network:​cisco:​stp:​mstp:​mstp]] +
-      * [[tech:​network:​cisco:​stp:​mstp:​inter-region-mstp:​inter-region-mstp]] +
-      * 2.1.a Implement and troubleshoot switch administration +
-        * 2.1.a [i] Managing MAC address table +
-        * 2.1.a [ii] errdisable recovery +
-        * 2.1.a [iii] L2 MTU +
-      * 2.1.b Implement and troubleshoot layer 2 protocols +
-        * 2.1.b [i] CDP, LLDP +
-        * 2.1.b [ii] UDLD +
-      * 2.1.c Implement and troubleshoot VLAN +
-        * 2.1.c [i] Access ​ports +
-        * 2.1.c [ii] VLAN database +
-        * 2.1.c [iii] Normal, extended VLAN, voice VLAN +
-      * 2.1.d Implement and troubleshoot trunking +
-        * 2.1.d [i] VTPv1, VTPv2, VTPv3, VTP pruning +
-        * 2.1.d [ii] dot1Q +
-        * 2.1.d [iii] Native VLAN +
-        * 2.1.d [iv] Manual pruning +
-      * 2.1.e Implement and troubleshoot ​EtherChannel +
-        * 2.1.e [i] LACP, PAgP, manual +
-        * 2.1.e [ii] Layer 2, layer 3 +
-        * 2.1.e [iii] Load-balancing +
-        * 2.1.e [iv] Etherchannel ​misconfiguration guard +
-      * 2.1.f Implement and troubleshoot spanning-tree +
-        * 2.1.f [i] PVST+/​RPVST+/​MST +
-        * 2.1.f [ii] Switch ​priority, port priority, path cost, STP timers +
-        * 2.1.f [iii] port fast, BPDUguard, BPDUfilter +
-        * 2.1.f [iv] loopguard, rootguard +
-      * 2.1.g Implement and troubleshoot other LAN switching technologies +
-        * 2.1.g [i] SPAN, RSPAN, ERSPAN+
           * [[tech:​network:​cisco:​span-rspan:​span-rspan]]           * [[tech:​network:​cisco:​span-rspan:​span-rspan]]
-      ​2.1.h Describe chassis virtualization and aggregation technologies +    ​* 1.2 Layer Multicast 
-        * 2.1.h [i] Multichassis +      * 1.2.a Implement and troubleshoot IGMP 
-        * 2.1.h [ii] VSS concepts +        * 1.2.a [I] IGMPv1, IGMPv2, IGMPv3 
-        * 2.1.h [iii] Alternative to STP +        * 1.2.a [ii] IGMP snooping 
-        * 2.1.h [iv] Stackwise +        * 1.2.a [iii] IGMP querier 
-        * 2.1.h [v] Excluding specific platform implementation +        * 1.2.a [iv] IGMP filter 
-      * 2.1.i Describe spanning-tree concepts +        * 1.2.a [v] IGMP proxy 
-        * 2.1.i [i] Compatibility between MST and RSTP +    1.3 Layer WAN circuit technologies 
-        * 2.1.i [ii] STP dispute, STP bridge assurance +      * 1.3.a Implement and troubleshoot HDLC 
-    * 2.2 Layer 2 multicast +      1.3.b Implement and troubleshoot PPP 
-      * 2.2.a Implement and troubleshoot IGMP +        1.3.b [i] authentication ​[PAP, CHAP] 
-        * 2.2.a [i] IGMPv1, IGMPv2, IGMPv3 +        * 1.3.b [iiPPPoE 
-        * 2.2.a [ii] IGMP snooping +        1.3.b [iiiMLPPP 
-        * 2.2.a [iii] IGMP querier +    * 1.4 Troubleshooting layer 2 technologies 
-        * 2.2.a [iv] IGMP filter +      * 1.4.a Use IOS troubleshooting tools 
-        * 2.2.a [v] IGMP proxy +        * 1.4.a [idebug, conditional debug 
-      2.2.b Explain MLD +        1.4.a [iiping, traceroute with extended options 
-      * 2.2.c Explain PIM snooping +        1.4.a [iii] Embedded packet capture 
-    2.3 Layer 2 WAN circuit technologies +      * 1.4.b Apply troubleshooting methodologies 
-      * [[tech:​network:​cisco:​wan-serial:​wan-serial]] +        * 1.4.b [i] Diagnose the root cause of networking issue [analyze symptomsidentify and describe root cause
-      * [[tech:​network:​cisco:​ppp:​ppp]+        * 1.4.b [ii] Design and implement valid solutions according to constraints 
-      * [[tech:​network:​cisco:​pppoe:​pppoe]+        * 1.4.b [iii] Verify and monitor resolution 
-      * [[tech:​network:​cisco:​pppoe-server:​pppoe-server]+      * 1.4.c Interpret packet capture 
-      2.3.a Implement and troubleshoot HDLC +        * 1.4.c [i] Using wireshark trace analyzer 
-      * 2.3.b Implement and troubleshoot PPP +        * 1.4.c [ii] Using IOS embedded packet capture 
-        * 2.3.b [i] Authentication ​[PAPCHAP+  * 2.0 Layer 3 Technologies 
-        * 2.3.b [ii] PPPoE +    * 2.1 Addressing technologies 
-        * 2.3.b [iii] MLPPP +      * 2.1.a Identify, implement and troubleshoot IPv4 addressing and sub-netting 
-      * 2.3.c Describe WAN rate-based ethernet circuits +        * 2.1.a [i] Address types, VLSM 
-        * 2.3.c [i] Metro and WAN Ethernet topologies +        * 2.1.a [ii] ARP 
-        * 2.3.c [ii] Use of rate-limited WAN ethernet services +      * 2.1.b Identify, implement and troubleshoot IPv6 addressing and sub-netting 
-  * 3.0 Layer 3 Technologies +        * 2.1.b [i] Unicast, multicast 
-    * 3.1 Addressing technologies +        * 2.1.b [ii] EUI-64 
-      * 3.1.a Identify, implement and troubleshoot IPv4 addressing and subnetting +        * 2.1.b [iii] ND, RS/RA 
-        * 3.1.a [i] Address types, VLSM +        * 2.1.b [iv] Autoconfig/​SLAAC temporary addresses [RFC4941] 
-        * 3.1.a [ii] ARP +        * 2.1.b [v] Global prefix configuration feature 
-      * 3.1.b Identify, implement and troubleshoot IPv6 addressing and subnetting +    * 2.2 Layer 3 Multicast 
-        * [[tech:​network:​cisco:​icmpv6:​icmpv6]] +      * 2.2.a Troubleshoot reverse path forwarding 
-        * [[tech:​network:​cisco:​ipv6-addressing:​ipv6-addressing]] +        * 2.2.a [i] RPF failure 
-        * [[tech:​network:​cisco:​slaac-dhcpv6-pd:​slaac-dhcpv6-pd]] +        * 2.2.a[ii] RPF failure with tunnel interface 
-        * [[tech:​network:​cisco:​dual-stack:​dual-stack]] +      * 2.2.b Implement and troubleshoot IPv4 protocol independent multicast 
-        * [[tech:​network:​cisco:​ipv6-tunnel:​ipv6-tunnel]] +        * 2.2.b [i] PIM dense mode, sparse mode, sparse-dense mode 
-        * [[tech:​network:​cisco:​ipv6:​ipv6-again:​ipv6-again]] +        * 2.2.b [ii] Static RP, auto-RP, BSR 
-        * [[tech:​network:​cisco:​ipv6:​ipv6-acl:​ipv6-acl]] +        * 2.2.b [iii] Bidirectional ​PIM 
-        * 3.1.b [i] Unicast, multicast +        * 2.2.b [iv] Source-specific multicast 
-        * 3.1.b [ii] EUI-64 +        * 2.2.b [v] Group to RP mapping 
-        * 3.1.b [iii] ND, RS/RA +        * 2.2.b [vi] Multicast boundary 
-        * 3.1.b [iv] Autoconfig/​SLAACtemporary addresses [RFC4941] +      * 2.2.c Implement and troubleshoot multicast source discovery protocol 
-        * 3.1.b [v] Global prefix configuration feature +        * 2.2.c.[i] Intra-domain MSDP [anycast RP] 
-        * 3.1.b [vi] DHCP protocol operations +        * 2.2.c.[ii] SA filter 
-        * 3.1.b [vii] SLAAC/​DHCPv6 interaction +    * 2.3 Fundamental routing concepts 
-        * 3.1.b [viii] Stateful, stateless DHCPv6 +      * 2.3.a Implement and troubleshoot static routing 
-        * 3.1.b [ix] DHCPv6 prefix delegation +      * 2.3.b Implement and troubleshoot default routing 
-    * 3.2 Layer 3 multicast +      * 2.3.c Compare routing protocol types 
-      * 3.2.a Troubleshoot reverse path forwarding +        * 2.3.c [i] distance ​vector 
-        * 3.2.a [i] RPF failure +        * 2.3.c [ii] link state 
-        * 3.2.a [ii] RPF failure with tunnel interface +        * 2.3.c [iii] path vector 
-      * 3.2.b Implement and troubleshoot IPv4 protocol independent multicast +      * 2.3.d Implement, optimize and troubleshoot administrative distance 
-        * 3.2.b [i] PIM dense mode, sparse mode, sparse-dense mode +      * 2.3.e Implement and troubleshoot passive interface 
-        * 3.2.b [ii] Static RP, auto-RP, BSR +      * 2.3.f Implement and troubleshoot VRF lite 
-        * 3.2.b [iii] BiDirectional ​PIM +      * 2.3.g Implement, optimize and troubleshoot filtering with any routing protocol 
-        * 3.2.b [iv] Source-specific multicast +      * 2.3.h Implement, optimize and troubleshoot redistribution between any routing protocol 
-        * 3.2.b [v] Group to RP mapping +      * 2.3.i Implement, optimize and troubleshoot manual and auto summarization with any routing protocol 
-        * 3.2.b [vi] Multicast boundary +      * 2.3.j Implement, optimize and troubleshoot policy-based routing 
-      * 3.2.c Implement and troubleshoot multicast source discovery protocol +      * 2.3.k Identify and troubleshoot sub-optimal routing 
-        * 3.2.c [i] Intra-domain MSDP [anycast RP] +      * 2.3.l Implement and troubleshoot bidirectional forwarding detection 
-        * 3.2.c [ii] SA filter +      * 2.3.m Implement and troubleshoot loop prevention mechanisms 
-      3.2.d Describe IPv6 multicast +        * 2.3.m [i] Route tagging, filtering 
-        * 3.2.d [i] IPv6 multicast addresses +        * 2.3.m [ii] Split horizon 
-        * 3.2.d [ii] PIMv6 +        * 2.3.m [iii] Route poisoning 
-    * 3.3 Fundamental routing concepts +      * 2.3.n Implement and troubleshoot routing protocol authentication 
-      * 3.3.a Implement and troubleshoot static routing +        * 2.3.n [i] MD5 
-      * 3.3.b Implement and troubleshoot default routing +        * 2.3.n [ii] key-chain 
-      * 3.3.c Compare routing protocol types +        * 2.3.n [iii] EIGRP HMAC SHA2-256bit 
-        * 3.3.c [i] Distance ​vector +        * 2.3.n [iv] OSPFv2 SHA1-196bit 
-        * 3.3.c [ii] Link state +        * 2.3.n [v] OSPFv3 IPsec authentication 
-        * 3.3.c [iii] Path vector +    * 2.4 RIP v2 
-      * 3.3.d Implement, optimize and troubleshoot administrative distance +      * 2.4.a Implement and troubleshoot RIPv2 
-      * 3.3.e Implement and troubleshoot passive interface +    * 2.5 EIGRP [for IPv4 and IPv6] 
-      * 3.3.f Implement and troubleshoot VRF lite +      * 2.5.a Describe packet types 
-      * 3.3.g Implement, optimize and troubleshoot filtering with any routing protocol +        * 2.5.a [i] Packet types [hello, query, update, and such] 
-      * 3.3.h Implement, optimize and troubleshoot redistribution between any routing protocol +        * 2.5.a [ii] Route types [internal, external] 
-      * 3.3.i Implement, optimize and troubleshoot manual and auto summarization with any routing protocol +      * 2.5.b Implement and troubleshoot neighbor relationship 
-      * 3.3.j Implement, optimize and troubleshoot policy-based routing +        * 2.5.b [i] Multicast, unicast EIGRP peering 
-      * 3.3.k Identify and troubleshoot sub-optimal routing +      * 2.5.c Implement and Troubleshoot Loop free path selection 
-      * 3.3.l Implement and troubleshoot bidirectional forwarding detection +        * 2.5.c [i] RD, FD, FC, successor, feasible successor 
-      * 3.3.m Implement and troubleshoot loop prevention mechanisms +        * 2.5.c [ii] Classic metric 
-        * 3.3.m [i] Route tagging, filtering +        * 2.5.c [iii] Wide metric 
-        * 3.3.m [ii] Split horizon +      * 2.5.d Implement and troubleshoot operations 
-        * 3.3.m [iii] Route poisoning +        * 2.5.d [i] General operations 
-      * 3.3.n Implement and troubleshoot routing protocol authentication +        * 2.5.d [ii] Topology table, update, query, active, passive 
-        * 3.3.n [i] MD5 +        * 2.5.d [iii] Stuck in active 
-        * 3.3.n [ii] Key-chain +        * 2.5.d [iv] Graceful shutdown 
-        * 3.3.n [iii] EIGRP HMAC SHA2-256bit +      * 2.5.e Implement and troubleshoot EIGRP stub 
-        * 3.3.n [iv] OSPFv2 SHA1-196bit +        * 2.5.e [i] stub 
-        * 3.3.n [v] OSPFv3 IPsec authentication +        * 2.5.e [ii] leak-map 
-    * 3.4 RIP [v2 and v6] +      * 2.5.f Implement and troubleshoot load-balancing 
-      * [[tech:​network:​cisco:​rip:​rip|RIP]] +        * 2.5.f [i] equal-cost 
-      * [[tech:​network:​cisco:​basic-rip-config:​basic-rip-config|RIP Configuration Getting Started]] +        * 2.5.f [ii] unequal-cost 
-      * [[tech:​network:​cisco:​advanced-rip-config:​advanced-rip-config]] +        * 2.5.f [iii] add-path 
-      * [[tech:​network:​cisco:​advanced-rip-config-2:​advanced-rip-config-2]] +      * 2.5.g Implement EIGRP [multi-address] named mode 
-      * [[tech:​network:​cisco:​verify-rip-status:​verify-rip-status]] +        * 2.5.g [i] Types of families 
-      * [[tech:​network:​cisco:​ipv6:​ripng:​ripng]] +        * 2.5.g [ii] IPv4 address-family 
-      * 3.4.a Implement and troubleshoot RIPv2 +        * 2.5.g [iii] IPv6 address-family 
-      * 3.4.b Describe RIPv6 [RIPng] +      * 2.5.h Implement, troubleshoot and optimize EIGRP convergence and scalability 
-    * 3.5 EIGRP [for IPv4 and IPv6] +        * 2.5.h [i] Describe fast convergence requirements 
-      * [[tech:​network:​cisco:​eigrp:​eigrp:​eigrp-basic:​eigrp-basic]] +        * 2.5.h [ii] Control query boundaries 
-      * [[tech:​network:​cisco:​eigrp:​eigrp:​eigrp-for-ipv6:​eigrp-for-ipv6]] +        * 2.5.h [iii] IP FRR/fast reroute [single hop] 
-      * 3.5.a Describe packet types +        * 2.5.[iv] Summary leak-map 
-        * 3.5.a [i] Packet types [hello, query, update, and such] +        * 2.5.h [v] Summary metric 
-        * 3.5.a [ii] Route types [internal, external] +    * 2.6 OSPF [v2 and v3] 
-      * 3.5.b Implement and troubleshoot neighbor relationship +      * 2.6.a Describe packet types 
-        * 3.5.b [i] Multicast, unicast EIGRP peering +        * 2.6.a [i] LSA types [1, 2, 3, 4, 5, 7, 9] 
-        * 3.5.b [ii] OTP point-to-point peering +        * 2.6.a [ii] Route types [N1, N2, E1, E2] 
-        * 3.5.b [iii] OTP route-reflector peering +      * 2.6.b Implement and troubleshoot neighbor relationship 
-        * 3.5.b [iv] OTP multiple service providers scenario +      * 2.6.c Implement and troubleshoot OSPFv3 address-family support 
-      * 3.5.c Implement and troubleshoot loop free path selection +        * 2.6.c [i] IPv4 address-family 
-        * 3.5.c [i] RD, FD, FC, successor, feasible successor +        * 2.6.c [ii] IPv6 address-family 
-        * 3.5.c [ii] Classic metric +      * 2.6.d Implement and troubleshoot network types, area types and router types 
-        * 3.5.c [iii] Wide metric +        * 2.6.d [i] Point-to-point,​ multipoint, broadcast, non-broadcast 
-      * 3.5.d Implement and troubleshoot operations +        * 2.6.d [ii] LSA types, area type: backbone, normal, transit, stub, NSSA, totally stub 
-        * 3.5.d [i] General operations +        * 2.6.d [iii] Internal router, ABR, ASBR 
-        * 3.5.d [ii] Topology table, update, query, active, passive +        * 2.6.d [iv] Virtual link 
-        * 3.5.d [iii] Stuck in active +      * 2.6.e Implement and troubleshoot path preference 
-        * 3.5.d [iv] Graceful shutdown +      * 2.6.f Implement and troubleshoot operations 
-      * 3.5.e Implement and troubleshoot EIGRP stub +        * 2.6.f [i] General operations 
-        * 3.5.e [i] Stub +        * 2.6.f [ii] Graceful shutdown 
-        * 3.5.e [ii] Leak-map +        * 2.6.f [iii] GTSM [generic ​TTL security mechanism
-      * 3.5.f Implement and troubleshoot load-balancing +      * 2.6.g Implement, troubleshoot and optimize OSPF convergence and scalability 
-        * 3.5.f [i] equal-cost +        * 2.6.g [i] Metrics 
-        * 3.5.f [ii] unequal-cost +        * 2.6.g [ii] LSA throttling, SPF tuning, fast hello 
-        * 3.5.f [iii] add-path +        * 2.6.g [iii] LSA propagation control [area types, ISPF] 
-      * 3.5.g Implement EIGRP [multi-address] named mode +        * 2.6.g [iv] IP FR/fast reroute [single hop] 
-        * 3.5.g [i] Types of families +        * 2.6.g [v] LFA/​loop-free alternative [multi hop] 
-        * 3.5.g [ii] IPv4 address-family +        * 2.6.g [vi] OSPFv3 prefix suppression 
-        * 3.5.g [iii] IPv6 address-family +    * 2.7 BGP 
-      * 3.5.h Implement, troubleshoot and optimize EIGRP convergence and scalability +      * 2.7.a Describe, implement and troubleshoot peer relationships 
-        * 3.5.h [i] Describe fast convergence requirements +        * 2.7.a [i] Peer-group, template 
-        * 3.5.h [ii] Control query boundaries +        * 2.7.a [ii] Active, passive 
-        * 3.5.h [iii] IP FRR/fast reroute [single hop] +        * 2.7.a [iii] States, timers 
-        * 3.5.[iv] Summary leak-map +        * 2.7.a [iv] Dynamic neighbors 
-        * 3.5.h [v] Summary metric +      * 2.7.b Implement and troubleshoot IBGP and EBGP 
-    * 3.6 OSPF [v2 and v3] +        * 2.7.b [i] EBGP, IBGP 
-      * [[tech:​network:​cisco:​ospf:​ospf:​ospf-basic:​ospf-basic]] +        * 2.7.b [ii] 4 bytes AS number 
-      * [[tech:​network:​cisco:​ipv6:​ospfv3:​ospfv3]] +        * 2.7.b [iii] Private AS 
-      * 3.6.a Describe packet types +      * 2.7.c Explain attributes and best-path selection 
-        * 3.6.a [i] LSA yypes [1, 2, 3, 4, 5, 7, 9] +      * 2.7.d Implement, optimize and troubleshoot routing policies 
-        * 3.6.a [ii] Route types [N1, N2, E1, E2] +        * 2.7.d [i] Attribute manipulation 
-      * 3.6.b Implement and troubleshoot neighbor relationship +        * 2.7.d [ii] Conditional advertisement 
-      * 3.6.c Implement and troubleshoot OSPFv3 address-family support +        * 2.7.d [iii] Outbound route filtering 
-        * 3.6.c [i] IPv4 address-family +        * 2.7.d [iv] Communities,​ extended communities 
-        * 3.6.c [ii] IPv6 address-family +        * 2.7.d [v] Multi-homing 
-      * 3.6.d Implement and troubleshoot network types, area types and router types +      * 2.7.e Implement and troubleshoot scalability 
-        * 3.6.d [i] Point-to-point,​ multipoint, broadcast, non-broadcast +        * 2.7.e [i] Route-reflector,​ cluster 
-        * 3.6.d [ii] LSA types, area type: backbone, normal, transit, stub, NSSA, totally stub +        * 2.7.e [ii] Confederations 
-        * 3.6.d [iii] Internal router, ABR, ASBR +        * 2.7.e [iii] Aggregation,​ AS set 
-        * 3.6.d [iv] Virtual link +      * 2.7.f Implement and troubleshoot ​multi-protocol ​BGP 
-      * 3.6.e Implement and troubleshoot path preference +        * 2.7.f [i] IPv4, IPv6, VPN address-family 
-      * 3.6.f Implement and troubleshoot operations +      * 2.7.g Implement and troubleshoot AS path manipulations 
-        * 3.6.f [i] General operations +        * 2.7.g [i] Local AS, allow AS in, remove private AS 
-        * 3.6.f [ii] Graceful shutdown +        * 2.7.g [ii] Prepend 
-        * 3.6.f [iii] GTSM [Generic ​TTL Security Mechanism+        * 2.7.g [iii] Regexp 
-      * 3.6.g Implement, troubleshoot and optimize OSPF convergence and scalability +      * 2.7.h Implement and Troubleshoot Other Features 
-        * 3.6.g [i] Metrics +        * 2.7.h [i] Multipath 
-        * 3.6.g [ii] LSA throttling, SPF tuning, fast hello +        * 2.7.h [ii] BGP synchronization 
-        * 3.6.g [iii] LSA propagation control [area types, ISPF] +        * 2.7.h [iii] Soft reconfiguration,​ route refresh 
-        * 3.6.g [iv] IP FRR/fast reroute [single hop] +    2.8 Troubleshooting layer technologies 
-        * 3.6.g [v] LFA/​loop-free alternative [multi hop] +      * 2.8.a Use IOS troubleshooting tools 
-        * 3.6.g [vi] OSPFv3 prefix suppression +        * 2.8.[i] debug, conditional debug 
-    * 3.7 BGP +        * 2.8.[ii] ping, traceroute with extended options 
-      * [[tech:​network:​cisco:​bgp:​bgp:​bgp-getting-started:​bgp-getting-started]] +        * 2.8.[iii] Embedded packet capture 
-      * [[tech:​network:​cisco:​bgp:​bgp:​bgp-as-path:​bgp-as-path]] +      * 2.8.b Apply troubleshooting methodologies 
-      * [[tech:​network:​cisco:​bgp:​bgp:​bgp-next-hop:​bgp-next-hop]] +        * 2.8.[i] Diagnose the root cause of networking issue [analyze symptomsidentify ​and describe root cause] 
-      * [[tech:​network:​cisco:​bgp:​bgp:​route-reflector:​route-reflector]] +        * 2.8.[iiDesign and implement valid solutions according to constraints 
-      * [[tech:​network:​cisco:​bgp:​bgp:​bgp-confederation:​bgp-confederation]] +        * 2.8.[iiiVerify and monitor resolution 
-      * [[tech:​network:​cisco:​bgp:​bgp:​bgp-peer-group:​bgp-peer-group]] +      * 2.8.c Interpret packet capture 
-      * [[tech:​network:​cisco:​bgp:​bgp:​bgp-synchronization-principle:​bgp-synchronization-principle]] +        2.8.c [i] Using wireshark trace analyzer 
-      * [[tech:​network:​cisco:​bgp:​bgp:​med:​med]] +        * 2.8.[iiUsing IOS embedded packet capture 
-      * [[tech:​network:​cisco:​bgp:​bgp:​local-pref:​local-pref]] +  * 3.0 VPN Technologies 
-      * [[tech:​network:​cisco:​bgp:​bgp:​aggregate-address:​aggregate-address]] +    * 3.1 Tunneling 
-      * [[tech:​network:​cisco:​bgp:​bgp:​weight:​weight]] +      * 3.1.a Implement and troubleshoot MPLS operations 
-      * [[tech:​network:​cisco:​bgp:​bgp:​community:​community]] +        * 3.1.a [i] Label stack, LSR, LSP 
-      * [[tech:​network:​cisco:​bgp:​bgp:​backdoor:​backdoor]] +        * 3.1.a [ii] LDP 
-      * [[tech:​network:​cisco:​bgp:​bgp:​remove-private-as:​remove-private-as]] +        * 3.1.a [iii] MPLS ping, MPLS traceroute 
-      * [[tech:​network:​cisco:​bgp:​bgp:​route-flap-dampening:​route-flap-dampening]] +      * 3.1.b Implement and troubleshoot basic MPLS L3VPN 
-      * [[tech:​network:​cisco:​bgp:​bgp:​maximum-prefix:​maximum-prefix]] +        * 3.1.b [i] L3VPN, CE, PE, P 
-      * [[tech:​network:​cisco:​bgp:​bgp:​no-auto-summary:​no-auto-summary]] +        * 3.1.b [ii] Extranet [route leaking] 
-      * [[tech:​network:​cisco:​bgp:​bgp:​route-filtering:​route-filtering]] +      * 3.1.c Implement and troubleshoot encapsulation 
-      * [[tech:​network:​cisco:​bgp:​bgp:​ip-as-path-access-list:​ip-as-path-access-list]] +        * 3.1.c [i] GRE 
-      * [[tech:​network:​cisco:​bgp:​bgp:​mp-bgp:​mp-bgp]] +        * 3.1.c [ii] Dynamic GRE 
-      * 3.7.a Describe, implement and troubleshoot peer relationships +        * 3.1.d Implement and troubleshoot DMVPN [single hub] 
-        * 3.7.a [i] Peer-group, template +        * 3.1.d [i] NHRP 
-        * 3.7.a [ii] Active, passive +        * 3.1.d [ii] DMVPN with IPsec using preshared key 
-        * 3.7.a [iii] States, timers +        * 3.1.d [iii] QoS profile 
-        * 3.7.a [iv] Dynamic neighbors +        * 3.1.d [iv] Pre-classify 
-      * 3.7.b Implement and troubleshoot IBGP and EBGP +    * 3.2 Encryption 
-        * 3.7.b [i] EBGP, IBGP +      * 3.2.a Implement and troubleshoot IPsec with preshared key 
-        * 3.7.b [ii] 4 bytes AS number +        * 3.2.[i] IPv4 site to IPv4 site 
-        * 3.7.b [iii] Private AS +        * 3.2.[ii] IPv6 in IPv4 tunnels 
-      * 3.7.c Explain attributes and best-path selection +        * 3.2.[iii] Virtual tunneling interface [VTI] 
-      * 3.7.d Implement, optimize and troubleshoot routing policies +    3.3 Troubleshooting VPN technologies 
-        * 3.7.d [i] Attribute manipulation +      * 3.3.a Use IOS troubleshooting tools 
-        * 3.7.d [ii] Conditional advertisement +        * 3.3.[i] debug, conditional debug 
-        * 3.7.d [iii] Outbound route filtering +        * 3.3.[ii] ping, traceroute with extended options 
-        * 3.7.d [iv] Communities,​ extended communities +        * 3.3.a [iii] Embedded packet capture 
-        * 3.7.d [v] Multi-homing +      * 3.3.b Apply troubleshooting methodologies 
-      * 3.7.e Implement and troubleshoot scalability +        * 3.3.[i] Diagnose the root cause of networking issue [analyze symptoms, identify and describe root cause] 
-        * 3.7.e [i] Route-reflector,​ cluster +        * 3.3.[ii] Design and implement valid solutions according to constraints 
-        * 3.7.e [ii] Confederations +        3.3.b [iiiVerify and monitor resolution 
-        * 3.7.e [iii] Aggregation,​ AS set +      * 3.3.c Interpret packet capture 
-      * 3.7.f Implement and troubleshoot ​multiproctocol ​BGP +        * 3.3.[i] Using wireshark trace analyzer 
-        * 3.7.f [i] IPv4, IPv6, VPN address-family +        * 3.3.[ii] Using IOS embedded packet capture 
-      * 3.7.g Implement and troubleshoot AS path manipulations +  * 4.0 Infrastructure Security 
-        * 3.7.g [i] Local AS, allow AS in, remove private AS +    * 4.1 Device security
-        * 3.7.g [ii] Prepend +
-        * 3.7.g [iii] Regexp +
-      * 3.7.h Implement and troubleshoot other features +
-        * 3.7.h [i] Multipath +
-        * 3.7.h [ii] BGP synchronization +
-        * 3.7.h [iii] Soft reconfiguration,​ route refresh +
-      * 3.7.i Describe BGP fast convergence features +
-        * 3.7.[i] Prefix independent convergence +
-        * 3.7.[ii] Add-path +
-        * 3.7.[iii] Next-hop address tracking +
-    * 3.8 ISIS [for IPv4 and IPv6] +
-      * 3.8.a Describe basic ISIS network +
-        * 3.8.[i] Single areasingle topology +
-      * 3.8.b Describe neighbor relationship +
-      * 3.8.c Describe network types, levels ​and router types +
-        * 3.8.[iNSAP addressing +
-        * 3.8.[iiPoint-to-point,​ broadcast +
-      * 3.8.d Describe operations +
-      3.8.e Describe optimization features +
-        * 3.8.[iMetrics, wide metric +
-  * 4.0 VPN Technologies +
-    * 4.1 Tunneling +
-      * [[tech:​network:​cisco:​vpn:​tunneling:​gre:​gre]] +
-      * [[tech:​network:​cisco:​vpn:​tunneling:​gre-over-ipsec:​gre-over-ipsec]] +
-      * [[tech:​network:​cisco:​vpn:​tunneling:​dmvpn:​dmvpn]] +
-      * 4.1.a Implement and troubleshoot MPLS operations +
-        * 4.1.a [i] Label stack, LSR, LSP +
-        * 4.1.a [ii] LDP +
-        * 4.1.a [iii] MPLS ping, MPLS traceroute +
-      * 4.1.b Implement and troubleshoot basic MPLS L3VPN +
-        * 4.1.b [i] L3VPN, CE, PE, P +
-        * 4.1.b [ii] Extranet [route leaking] +
-      * 4.1.c Implement and troubleshoot encapsulation +
-        * 4.1.c [i] GRE +
-        * 4.1.c [ii] Dynamic GRE +
-        * 4.1.c [iii] LISP encapsulation principles supporting EIGRP OTP +
-      * 4.1.d Implement and troubleshoot DMVPN [single hub] +
-        * 4.1.d [i] NHRP +
-        * 4.1.d [ii] DMVPN with IPsec using preshared key +
-        * 4.1.d [iii] QoS profile +
-        * 4.1.d [iv] Pre-classify +
-      * 4.1.e Describe IPv6 tunneling techniques +
-        * 4.1.[i] 6in4, 6to4 +
-        * 4.1.[ii] ISATAP +
-        * 4.1.[iii] 6RD +
-        4.1.e [iv] 6PE/6VPE +
-      * 4.1.g Describe basic layer 2 VPN —wireline +
-        * 4.1.[i] L2TPv3 general principals +
-        * 4.1.[ii] ATOM general principals +
-      * 4.1.h Describe basic L2VPN — LAN services +
-        * 4.1.[i] MPLS-VPLS general principals +
-        * 4.1.[ii] OTV general principals +
-    4.2 Encryption +
-      * [[tech:​network:​cisco:​vpn:​encryption:​ipsec:​ipsec]+
-      * 4.2.a Implement and troubleshoot IPsec with preshared key +
-        * 4.2.[i] IPv4 site to IPv4 site +
-        * 4.2.[ii] IPv6 in IPv4 tunnels +
-        * 4.2.a [iii] Virtual tunneling Interface [VTI] +
-      * 4.2.b Describe GET VPN +
-  * 5.0 Infrastructure Security +
-    * 5.1 Device security+
       * [[tech:​network:​cisco:​snmp:​snmp]]       * [[tech:​network:​cisco:​snmp:​snmp]]
       * [[tech:​network:​cisco:​snmp:​snmpv3:​snmpv3]]       * [[tech:​network:​cisco:​snmp:​snmpv3:​snmpv3]]
       * [[tech:​network:​cisco:​radius:​radius]]       * [[tech:​network:​cisco:​radius:​radius]]
       * [[tech:​network:​cisco:​tacacs+:​tacacs+]]       * [[tech:​network:​cisco:​tacacs+:​tacacs+]]
-      * [[tech:​network:​cisco:​privilege-level-exec:​privilege-level-exec]] +      * 4.1.a Implement and troubleshoot IOS AAA using local database 
-      * 5.1.a Implement and troubleshoot IOS AAA using local database +      * 4.1.b Implement and troubleshoot device access control 
-      * 5.1.b Implement and troubleshoot device access control +        * 4.1.b [i] Lines [VTY, AUX, console] 
-        * 5.1.b [i] Lines [VTY, AUX, console] +        * 4.1.b [ii] SNMP 
-        * 5.1.b [ii] SNMP +        * 4.1.b [iii] Management plane protection 
-        * 5.1.b [iii] Management plane protection +        * 4.1.b [iv] Password encryption 
-        * 5.1.b [iv] Password encryption +      * 4.1.c Implement and troubleshoot control plane policing 
-      * 5.1.c Implement and troubleshoot control plane policing +    * 4.2 Network security
-      * 5.1.d Describe device security using IOS AAA with TACACS+ and RADIUS +
-        * 5.1.d [i] AAA with TACACS+ and RADIUS +
-        * 5.1.d [ii] Local privilege authorization fallback +
-    * 5.2 Network security+
       * [[tech:​network:​cisco:​acl:​catalyst-acl-racl-vacl-pacl:​catalyst-acl-racl-vacl-pacl]]       * [[tech:​network:​cisco:​acl:​catalyst-acl-racl-vacl-pacl:​catalyst-acl-racl-vacl-pacl]]
       * [[tech:​network:​cisco:​acl:​vacl:​vacl]]       * [[tech:​network:​cisco:​acl:​vacl:​vacl]]
       * [[tech:​network:​cisco:​acl:​pacl:​pacl]]       * [[tech:​network:​cisco:​acl:​pacl:​pacl]]
-      * [[tech:​network:​cisco:​stormcontrol:​stormcontrol]] 
       * [[tech:​network:​cisco:​dhcp-snooping:​dhcp-snooping]]       * [[tech:​network:​cisco:​dhcp-snooping:​dhcp-snooping]]
       * [[tech:​network:​cisco:​ip-source-guard:​ip-source-guard]]       * [[tech:​network:​cisco:​ip-source-guard:​ip-source-guard]]
       * [[tech:​network:​cisco:​dynamic-arp-inspection:​dynamic-arp-inspection]]       * [[tech:​network:​cisco:​dynamic-arp-inspection:​dynamic-arp-inspection]]
 +      * [[tech:​network:​cisco:​stormcontrol:​stormcontrol]]
       * [[tech:​network:​cisco:​pvlan:​pvlan]]       * [[tech:​network:​cisco:​pvlan:​pvlan]]
-      * [[tech:​network:​cisco:​802.1x:​802.1x]] +      * 4.2.a Implement and troubleshoot switch security features 
-      * 5.2.a Implement and troubleshoot switch security features +        * 4.2.a [i] VACL, PACL 
-        * 5.2.a [i] VACL, PACL +        * 4.2.a [ii] Stormcontrol 
-        * 5.2.a [ii] Stormcontrol +        * 4.2.a [iii] DHCP snooping 
-        * 5.2.a [iii] DHCP snooping +        * 4.2.a [iv] IP source-guard 
-        * 5.2.a [iv] IP source-guard +        * 4.2.a [v] Dynamic ARP inspection 
-        * 5.2.a [v] Dynamic ARP inspection +        * 4.2.a [vi] Port-security 
-        * 5.2.a [vi] port-security +        * 4.2.a [vii] Private VLAN 
-        * 5.2.a [vii] Private VLAN +      * 4.2.b Implement and troubleshoot router security features 
-      * 5.2.b Implement and troubleshoot router security features +        * 4.2.b [i] IPv4 access control lists [standard, extended, time-based] 
-        * 5.2.b [i] IPv4 access control lists [standard, extended, time-based] +        * 4.2.b [ii] IPv6 traffic filter 
-        * 5.2.b [ii] IPv6 traffic filter +        * 4.2.b [iii] Unicast reverse path forwarding 
-        * 5.2.b [iii] Unicast reverse path forwarding +      * 4.2.c Implement and troubleshoot IPv6 first hop security 
-      * 5.2.c Implement and troubleshoot IPv6 first hop security +        * 4.2.c [i] RA guard 
-        * 5.2.c [i] RA guard +        * 4.2.c [ii] DHCP guard 
-        * 5.2.c [ii] DHCP guard +        * 4.2.c [iii] Binding table 
-        * 5.2.c [iii] Binding table +        * 4.2.c [iv] Device tracking 
-        * 5.2.c [iv] Device tracking +        * 4.2.c [v] ND inspection/​snooping 
-        * 5.2.c [v] ND inspection/​snooping +        * 4.2.c [vi] Source guard 
-        * 5.2.c [vii] Source guard +        * 4.2.c [vii] PACL 
-        * 5.2.c [viii] PACL +    * 4.3 Troubleshooting infrastructure security 
-      * 5.2.d Describe 802.1x +      * 4.3.a Use IOS troubleshooting tools 
-        * 5.2.[i] 802.1xEAPRADIUS +        * 4.3.[i] debug, conditional debug 
-        * 5.2.[ii] MAC authentication bypass +        * 4.3.a [ii] pingtraceroute with extended options 
-  * 6.0 Infrastructure Services +        * 4.3.a [iii] Embedded packet capture 
-    * 6.1 System management+      * 4.3.b Apply troubleshooting methodologies 
 +        * 4.3.b [i] Diagnose the root cause of networking issue [analyze symptomsidentify and describe root cause] 
 +        * 4.3.[ii] Design and implement valid solutions according to constraints 
 +        * 4.3.b [iii] Verify and monitor resolution 
 +      * 4.3.c Interpret packet capture 
 +        * 4.3.c [i] Using wireshark trace analyzer 
 +        * 4.3.c [ii] Using IOS embedded packet capture 
 +  * 5.0 Infrastructure Services 
 +    * 5.1 System management
       * [[tech:​network:​cisco:​snmp:​snmp]]       * [[tech:​network:​cisco:​snmp:​snmp]]
       * [[tech:​network:​cisco:​snmp:​snmpv3:​snmpv3]]       * [[tech:​network:​cisco:​snmp:​snmpv3:​snmpv3]]
-      * [[tech:​network:​cisco:​syslog:​syslog]] 
       * [[tech:​network:​cisco:​clock:​clock]]       * [[tech:​network:​cisco:​clock:​clock]]
-      * 6.1.a Implement and troubleshoot device management +      * 5.1.a Implement and troubleshoot device management 
-        * 6.1.a [i] Console and VTY +        * 5.1.a [i] Console and VTY 
-        * 6.1.a [ii] telnet, HTTP, HTTPS, SSH, SCP +        * 5.1.a [ii] telnet, HTTP, HTTPS, SSH, SCP 
-        * 6.1.a [iii] [T]FTP +        * 5.1.a [iii] [T]FTP 
-      * 6.1.b Implement and troubleshoot SNMP +      * 5.1.b Implement and troubleshoot SNMP 
-        * 6.1.b [i] v2c, v3 +        * 5.1.b [i] v2c, v3 
-      * 6.1.c Implement and troubleshoot logging +      * 5.1.c Implement and troubleshoot logging 
-        * 6.1.c [i] Local logging, syslog, debug, conditional debug +        * 5.1.c [i] Local logging, syslog, debug, conditional debug 
-        * 6.1.c [ii] Timestamp +        * 5.1.c [ii] Timestamp 
-    * 6.2 Quality of service +    * 5.2 Quality of service 
-      * [[tech:​network:​cisco:​qos:​qos]] +      * 5.2.a Implement and troubleshoot end to end QoS 
-      * [[tech:​network:​cisco:​qos:​catalyst:​catalyst]] +        * 5.2.a [i] CoS and DSCP mapping 
-      * [[tech:​network:​cisco:​qos:​diffserv:​diffserv]] +      * 5.2.b Implement, optimize and troubleshoot QoS using MQC 
-      * 6.2.a Implement and troubleshoot end-to-end QoS +        * 5.2.b [i] Classification 
-        * 6.2.a [i] CoS and DSCP mapping +        * 5.2.b [ii] Network based application recognition [NBAR] 
-      * 6.2.b Implement, optimize and troubleshoot QoS using MQC +        * 5.2.b [iii] Marking using IP precedence, DSCP, CoS, ECN 
-        * 6.2.b [i] Classification +        * 5.2.b [iv] Policing, shaping 
-        * 6.2.b [ii] Network based application recognition [NBAR] +        * 5.2.b [v] Congestion management [queuing] 
-        * 6.2.b [iii] Marking using IP precedence, DSCP, CoS, ECN +        * 5.2.b [vi] HQoS, sub-rate ethernet link 
-        * 6.2.b [iv] Policing, shaping +        * 5.2.b [vii] Congestion avoidance [WRED] 
-        * 6.2.b [v] Congestion management [queuing] +    * 5.3 Network services 
-        * 6.2.b [vi] HQoS, sub-rate ethernet link +      * 5.3.a Implement and troubleshoot first-hop redundancy protocols 
-        * 6.2.b [vii] Congestion avoidance [WRED] +        * 5.3.a [i] HSRP, GLBP, VRRP 
-      * 6.2.c Describe layer 2 QoS +        * 5.3.a [ii] Redundancy using IPv6 RS/RA 
-        * 6.2.c [i] Queuing, scheduling +      * 5.3.b Implement and troubleshoot network time protocol
-        * 6.2.c [ii] Classification,​ marking +
-    * 6.3 Network services +
-      * 6.3.a Implement and troubleshoot first-hop redundancy protocols +
-        * [[tech:​network:​cisco:​icmp-redirects:​icmp-redirects]] +
-        * [[tech:​network:​cisco:​hsrp:​hsrp]] +
-        * [[tech:​network:​cisco:​glbp:​glbp]] +
-        * [[tech:​network:​cisco:​vrrp:​vrrp]] +
-        * 6.3.a [i] HSRP, GLBP, VRRP +
-        * 6.3.a [ii] Redundancy using IPv6 RS/RA +
-      * 6.3.b Implement and troubleshoot network time protocol+
         * [[tech:​network:​cisco:​clock:​clock]]         * [[tech:​network:​cisco:​clock:​clock]]
-        * 6.3.b [i] NTP master, client, version 3, version 4 +        * 5.3.b [i] NTP master, client, version 3, version 4 
-        * 6.3.b [ii] NTP Authentication +        * 5.3.b [ii] NTP authentication 
-      * 6.3.c Implement and troubleshoot IPv4 and IPv6 DHCP +      * 5.3.c Implement and troubleshoot IPv4 and IPv6 DHCP 
-        * [[tech:​network:​cisco:​dhcp:​dhcp]] +        * 5.3.c [i] DHCP client, IOS DHCP server, DHCP relay 
-        * [[tech:​network:​cisco:​dhcp-relay-agent:​dhcp-relay-agent]] +        * 5.3.c [ii] DHCP options 
-        * [[tech:​network:​cisco:​dhcp-redundancy:​dhcp-redundancy]] +        * 5.3.c [iii] DHCP protocol operations 
-        * 6.3.c [i] DHCP client, IOS DHCP server, DHCP relay +        * 5.3.c [iv] SLAAC/​DHCPv6 interaction 
-        * 6.3.c [ii] DHCP options +        * 5.3.c [v] Stateful, stateless DHCPv6 
-        * 6.3.c [iii] DHCP protocol operations +        * 5.3.c [vi] DHCPv6 prefix delegation 
-        * 6.3.c [iv] SLAAC/​DHCPv6 interaction +      * 5.3.d Implement and troubleshoot IPv4 network address translation 
-        * 6.3.c [v] Stateful, stateless DHCPv6 +        * 5.3.d [i] Static NAT, dynamic NAT, policy-based NAT, PAT 
-        * 6.3.c [vi] DHCPv6 prefix delegation +        * 5.3.d [ii] NAT ALG 
-      * 6.3.d Implement and troubleshoot IPv4 network address translation +    * 5.4 Network optimization 
-        * [[tech:​network:​cisco:​static-nat:​static-nat|Static NAT]] +      * 5.4.a Implement and troubleshoot IP SLA
-        * [[tech:​network:​cisco:​dynamic-nat:​dynamic-nat|Dynamic NAT]] +
-        * [[tech:​network:​cisco:​pat:​pat|PAT]] +
-        * [[tech:​network:​cisco:​nat-show-commands:​nat-show-command|NAT show commands]] +
-        * [[tech:​network:​cisco:​nat-timeout:​nat-timeout|NAT Timeout]] +
-        * [[tech:​network:​cisco:​nat-pat-trouble-shooting:​nat-pat-trouble-shooting|NAT,​ PAT Troubleshooting]] +
-        * 6.3.d [i] Static NAT, dynamic NAT, policy-based NAT, PAT +
-        * 6.3.d [ii] NAT ALG +
-      * 6.3.e Describe IPv6 network address translation +
-        * 6.3.e [i] NAT64 +
-        * 6.3.e [ii] NPTv6 +
-    * 6.4 Network optimization +
-      * 6.4.a Implement and troubleshoot IP SLA+
         * [[tech:​network:​cisco:​ip-sla:​ip-sla]]         * [[tech:​network:​cisco:​ip-sla:​ip-sla]]
-        * 6.4.a [i] ICMP, UDP, Jitter, VoIP +        * 5.4.a [i] ICMP, UDP, jitter, VoIP 
-      * 6.4.b Implement and troubleshoot tracking object+      * 5.4.b Implement and troubleshoot tracking object
         * [[tech:​network:​cisco:​ip-sla:​ip-sla]]         * [[tech:​network:​cisco:​ip-sla:​ip-sla]]
-        * 6.4.b [i] Tracking object, tracking list +        * 5.4.b [i] Tracking object, tracking list 
-        * 6.4.b [ii] Tracking different entities [e.g. interfaces, routes, IPSLA, and such] +        * 5.4.b [ii] Tracking different entities [e.g. interfaces, routes, IPSLA, and such] 
-      * 6.4.c Implement and troubleshoot netflow +      * 5.4.c Implement and troubleshoot netflow 
-        * [[tech:​network:​cisco:​netflow:​netflow]] +        * 5.4.c [i] Netflow v5, v9 
-        * [[tech:​network:​cisco:​flexible-netflow:​flexible-netflow]] +        * 5.4.c [ii] Local retrieval 
-        * 6.4.c [i] Netflow v5, v9 +        * 5.4.c [iii] Export [configuration only] 
-        * 6.4.c [ii] Local retrieval +      * 5.4.d Implement and troubleshoot embedded event manager 
-        * 6.4.c [iii] Export [configuration only] +        * 5.4.d [i] EEM policy using applet 
-      * 6.4.d Implement and troubleshoot embedded event manager +    * 5.5 Troubleshooting infrastructure services 
-        * 6.4.d [i] EEM policy using applet +      * 5.5.a Use IOS troubleshooting tools 
-        * 6.4.e Identify performance routing [PfR] +        * 5.5.a [i] debugconditional debug 
-        * 6.4.e [i] Basic load balancing +        * 5.5.a [ii] pingtraceroute with extended options 
-        * 6.4.e [ii] Voice optimization +        * 5.5.a [iii] Embedded packet capture 
-  * 7.0 Evolving Technologies v1.1 +      * 5.5.b Apply troubleshooting methodologies 
-    * 7.1 Cloud +        * 5.5.b [i] Diagnose the root cause of networking issue [analyze symptomsidentify ​and describe root cause
-      * 7.1.a Compare and contrast public, private, hybrid, and multicloud design considerations +        * 5.5.b [ii] Design ​and implement valid solutions according to constraints 
-        * 7.1.a [i] Infrastructureplatform, and software as a service (XaaS) +        * 5.5.[iii] Verify ​and monitor resolution 
-        * 7.1.a [ii] Performancescalability,​ and high availability +      * 5.5.c Interpret packet capture 
-        * 7.1.a [iii] Security implications,​ compliance, and policy +        * 5.5.[i] Using wireshark trace analyzer 
-        * 7.1.a [iv] Workload migration +        * 5.5.[ii] Using IOS embedded packet capture
-      * 7.1.b Describe cloud infrastructure and operations +
-        * 7.1.b [i] Compute virtualization (containers and virtual machines) +
-        * 7.1.b [ii] Connectivity (virtual switchesSD-WAN ​and SD-Access) +
-        * 7.1.b [iiiVirtualization functions (NFVi, VNF, and L4/L6) +
-        * 7.1.b [iv] Automation and orchestration tools (CloudCenter,​ DNA-center, and Kubernetes) +
-    * 7.2 Network programmability (SDN) +
-      * 7.2.a Describe architectural and operational considerations for a programmable network +
-        * 7.2.a [i] Data models and structures (YANG, JSON and XML) +
-        * 7.2.a [i] Device programmability (gRPC, NETCONF and RESTCONF) +
-        * 7.2.a [ii] Controller based network design (policy driven configuration ​and northbound/ southbound APIs) +
-        * 7.2.[iii] Configuration management tools (agent ​and agentless) and version control systems (Git and SVN) +
-    * 7.3 Internet of things (IoT) +
-      * 7.3.a Describe architectural framework and deployment considerations for IoT +
-        * 7.3.[i] IoT technology stack (IoT Network Hierarchy, data acquisition and flow) +
-        * 7.3.[ii] IoT standards and protocols (characteristics within IT and OT environment) +
-        * 7.3.a [iii] IoT security (network segmentation,​ device profiling, and secure remote)+
  
certification/tech/network/cisco/ccie/ccie-rsv5/written/written.txt · Last modified: 2019/11/09 08:43 by wnoguchi